Page 1 of 2

Puzzled

PostPosted: April 4th, 2009, 8:21 pm
by drathe
I finally decided to complete my two HeroQuest puzzles. I purchased them used, but one was stated as complete (Kellar's Keep), whereas the other was stated as unknown (Return of the Witch Lord). The seller never 'tried' to complete the puzzle. :? I took this as a 'missing pieces, but don't want to admit it or it'll never sell' scenario. It was dirt cheap so I took the chance.

Turns out I had the right assumption, as the 'unknown' puzzle was missing one piece. :( The other is like new. I'd turn it into a poster, but that would destroy the puzzle.

Re: Puzzled

PostPosted: March 17th, 2011, 11:13 am
by Ancalagon
mh if you can tell me exactly wich pice is missing i coud make a scan from mine and send it to you. then you just have to print it out and you could at least finish your puzzle.

Re: Puzzled

PostPosted: March 17th, 2011, 11:36 am
by drathe
I gave it to my sister to use for a craft project. I already have a complete Witch Lord Puzzle. Thank you.

Re: Puzzled

PostPosted: March 17th, 2011, 7:40 pm
by Jaguar69
I have a piece missing in my Kellers Keep jigsaw. Which is in a way to be expected. I picked it up from a carboot for £2.50!

I would be interested in someone being able to scan my missing piece if the offer stands for all? I will check through and find which one it is. This may take me some time to check! |_P

Re: Puzzled

PostPosted: March 17th, 2011, 10:39 pm
by drathe
A scan of a puzzle piece will likely not work, as I'm sure the cutter wasn't exactly aligned for every puzzle it cut.

Re: Puzzled

PostPosted: March 18th, 2011, 3:47 am
by Big Bene
It would be very difficult anyway to make a copy of the tile precise enough to fit. I would suggest to scan it with a few surrounding tiles, so Jaguar can place the print behind the hole.

Re: Puzzled

PostPosted: March 18th, 2011, 7:21 am
by Ancalagon
of course the offer stands for all!
if you can tell me which pice is missing I'll scan it for you.

Re: Puzzled

PostPosted: March 18th, 2011, 8:15 am
by Ethica
Why don't you people just print the area with the missing piece from a non puzzled jpeg of the picture?

Re: Puzzled

PostPosted: March 21st, 2019, 11:49 am
by ethan
Hi
I have also a puzzle with a missing piece.
It is the witch lord and the part is the 4th piece of the right side frame from the lower corner.
Could anyone help me out?

Thank you.

Regards from Germany...

Re: Puzzled

PostPosted: March 21st, 2019, 7:30 pm
by angeldeath
What are you searching for?
The original missing piece or help to replace with a "home made" one?