• Advertisement

Make a small donation to Ye Olde Inn!

Donate via Paypal

Every cent received goes toward Ye Olde Inn's maintenance and allows us to continue providing the best resources for HeroQuest and Fantasy Gaming fans.

3D Printed Build

Have a HeroQuest related project and need community assistance? Create a thread about your project here and the type of aid you require. Other community members searching this room may be able to assist, or join you on your adventure.

Re: 3D Printed Build

Postby iKarith » May 21st, 2021, 3:50 am

28mm minis that are sticking out from the base by over an inch in two directions take don't fit in 28mm even if that's their "scale". Which is why the scale base scale is getting larger and larger even if the height scale isn't. It's kinda why, more than anything else, I appreciate "oldhammer" so much. I like the minis to fit in the space provided for them. Oldhammer minis tend to be 25 or 28mm scale in height, and a medium-sized creature (I don't know if Warhammer uses anything quite like the D&D size scale) fits comfortably in a 1 inch square. You can give a couple extra mm if you want to for comfort, but it's not strictly necessary.
<InSpectreRetro> All hail Zargon!!! Morcar only has 1BP.


Rewards:
Slaughtered an Orc! Destroyed a Zombie! Unravelled a Mummy!
User avatar
Web Mage
iKarith

Elven Warrior
Elven Warrior
 
Posts: 623
Joined: February 14th, 2021, 12:42 pm
Location: Portlandia
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon
Usergroups:
Adventurers' Guild Group MemberChampion Group Member

Advertisement

Make a small donation to Ye Olde Inn!

Donate via Paypal

Every cent received goes toward Ye Olde Inn's maintenance and allows us to continue providing the best resources for HeroQuest and Fantasy Gaming fans.

Re: 3D Printed Build

Postby Sandman0077 » May 21st, 2021, 1:38 pm

3/15
You do not have the required permissions to view the files attached to this post.
"The World is not beautiful, and that, in a way, lends it some beauty; Therefore it is."


Rewards:
Created a Hot Topic.
User avatar
Sandman0077

Fimir
Fimir
 
Posts: 74
Joined: October 28th, 2013, 11:57 am
Location: Killeen, TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Champion Group Member

Re: 3D Printed Build

Postby Sandman0077 » May 23rd, 2021, 5:44 pm

4/15
You do not have the required permissions to view the files attached to this post.
"The World is not beautiful, and that, in a way, lends it some beauty; Therefore it is."


Rewards:
Created a Hot Topic.
User avatar
Sandman0077

Fimir
Fimir
 
Posts: 74
Joined: October 28th, 2013, 11:57 am
Location: Killeen, TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Champion Group Member

Re: 3D Printed Build

Postby Sandman0077 » May 25th, 2021, 9:01 pm

5/15
You do not have the required permissions to view the files attached to this post.
"The World is not beautiful, and that, in a way, lends it some beauty; Therefore it is."


Rewards:
Created a Hot Topic.
User avatar
Sandman0077

Fimir
Fimir
 
Posts: 74
Joined: October 28th, 2013, 11:57 am
Location: Killeen, TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Champion Group Member

Re: 3D Printed Build

Postby Sandman0077 » May 27th, 2021, 12:40 pm

6/15
You do not have the required permissions to view the files attached to this post.
"The World is not beautiful, and that, in a way, lends it some beauty; Therefore it is."


Rewards:
Created a Hot Topic.
User avatar
Sandman0077

Fimir
Fimir
 
Posts: 74
Joined: October 28th, 2013, 11:57 am
Location: Killeen, TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Champion Group Member

Re: 3D Printed Build

Postby Sandman0077 » May 29th, 2021, 1:03 pm

7/15
You do not have the required permissions to view the files attached to this post.
"The World is not beautiful, and that, in a way, lends it some beauty; Therefore it is."


Rewards:
Created a Hot Topic.
User avatar
Sandman0077

Fimir
Fimir
 
Posts: 74
Joined: October 28th, 2013, 11:57 am
Location: Killeen, TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Champion Group Member

Re: 3D Printed Build

Postby Sandman0077 » June 14th, 2021, 7:52 pm

8 and 9/15 done.
You do not have the required permissions to view the files attached to this post.
"The World is not beautiful, and that, in a way, lends it some beauty; Therefore it is."


Rewards:
Created a Hot Topic.
User avatar
Sandman0077

Fimir
Fimir
 
Posts: 74
Joined: October 28th, 2013, 11:57 am
Location: Killeen, TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Champion Group Member

Re: 3D Printed Build

Postby iKarith » June 14th, 2021, 7:59 pm

That's most of the pieces now!
<InSpectreRetro> All hail Zargon!!! Morcar only has 1BP.


Rewards:
Slaughtered an Orc! Destroyed a Zombie! Unravelled a Mummy!
User avatar
Web Mage
iKarith

Elven Warrior
Elven Warrior
 
Posts: 623
Joined: February 14th, 2021, 12:42 pm
Location: Portlandia
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon
Usergroups:
Adventurers' Guild Group MemberChampion Group Member

Re: 3D Printed Build

Postby Sandman0077 » June 14th, 2021, 8:00 pm

iKarith wrote:That's most of the pieces now!


Yeah, I took a short break to print some other stuff for my kids. Now back to HQ.
"The World is not beautiful, and that, in a way, lends it some beauty; Therefore it is."


Rewards:
Created a Hot Topic.
User avatar
Sandman0077

Fimir
Fimir
 
Posts: 74
Joined: October 28th, 2013, 11:57 am
Location: Killeen, TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Champion Group Member

Re: 3D Printed Build

Postby StratosVX » June 15th, 2021, 6:42 am

Ignore your kids like a real parent and show us some pictures! :lol:


Rewards:
Zealot Miniatures: Twisting Catacombs Kickstarter Backer
User avatar
Scribe of Heroes
StratosVX
I hate snakes, Jacques...

Scout
Scout
 
Posts: 1108
Joined: November 6th, 2012, 12:44 am
Location: Utah, USA
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon
Usergroups:
Wizards of Zargon Group Member Champion Group Member

PreviousNext

Return to Project Forge

Who is online

Users browsing this forum: No registered users and 1 guest