• Advertisement

Make a small donation to Ye Olde Inn!

Donate via Paypal

Every cent received goes toward Ye Olde Inn's maintenance and allows us to continue providing the best resources for HeroQuest and Fantasy Gaming fans.

North American Card Sizes for Sleeves

Discuss Quests, Cards, Monsters etc, from HeroQuest Game Systems.

North American Card Sizes for Sleeves

Postby defttitan » May 16th, 2019, 8:32 pm

I'm getting some sleeves for my cards, and I was surprised I couldn't find a topic here with card sizes. Posting this here and perhaps it will save somebody a moment :D

For the North American copy, my ruler says the size of the stock cards are 2 3/8" x 3 1/2" (~56mm x ~89mm) which is roughly American Board Game sized. go figure.
They might be 1/8" slimmer than the typical board game card.

Anyway, American Board Game size sleeves should work.
defttitan

Skeleton
Skeleton
 
Posts: 28
Joined: May 13th, 2019, 11:07 am
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon

Advertisement

Make a small donation to Ye Olde Inn!

Donate via Paypal

Every cent received goes toward Ye Olde Inn's maintenance and allows us to continue providing the best resources for HeroQuest and Fantasy Gaming fans.

Re: North American Card Sizes for Sleeves

Postby Kurgan » June 10th, 2019, 9:41 pm

Good tip! I use standard size UltraPro gaming card protectors, with the matte finish on one side. They may not be a perfect fit, but they shuffle well and look nice.
I'll see if I can find some of these for my originals...


Rewards:
Participated in a Miniature Exchange. Destroyed a Zombie!
User avatar
Channeler
Kurgan

Witch Lord
Witch Lord
 
Posts: 7105
Images: 85
Joined: February 23rd, 2019, 7:08 pm
Location: https://discord.gg/2R9pEP4cty
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon
Usergroups:
Scribes Group MemberAdventurers' Guild Group MemberChampion Group Member

Re: North American Card Sizes for Sleeves

Postby Jalapenotrellis » June 10th, 2019, 11:39 pm

Please educate a dumb guy on why you do this. I never thought about it, but I'd also not want bad things to happen to the cards. Will bad things happen?
Jalapenotrellis

Necromancer
Necromancer
 
Posts: 330
Joined: July 22nd, 2018, 2:50 am
Location: Austin,TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon
Usergroups:
Champion Group Member

Re: North American Card Sizes for Sleeves

Postby lestodante » June 11th, 2019, 5:52 pm

I use MayDay card sleeves for both version of the game.
For the US cards I use 57,5 x 89. I prefer the PREMIUM version, 125% thicker than the standard ones.

mayday57.5x89.jpg
You do not have the required permissions to view the files attached to this post.


Rewards:
Wizard of Zargon Group Member Participated in four (4) Miniature Exchanges. Participated in four (4) Miniature Exchanges. Participated in a Miniature Exchange. Wrote an article for the Blog. Encountered a menacing Chaos Warlock!
User avatar
lestodante

Yeti
Yeti
 
Posts: 2837
Images: 5
Joined: January 7th, 2017, 9:40 am
Location: Italy
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Wizards of Zargon Group MemberScribes Group MemberChampion Group Member

Re: North American Card Sizes for Sleeves

Postby Kurgan » June 11th, 2019, 9:16 pm

Jalapenotrellis wrote:Please educate a dumb guy on why you do this. I never thought about it, but I'd also not want bad things to happen to the cards. Will bad things happen?


If you keep your cards in box, or your rarely handle them and when you do, always making sure you are gentle and have clean hands, no problem. But if you're the type of person who wants to enjoy your game and you play a lot, and sometimes grab snacks while you play, etc. the card protectors are a way to help protect the cards from extra wear and tear.

Card protector sleeves typically aren't sealed, they're just sleeves, so they're not doing anything more than keeping dust and the oil (and occasional cheeto dust) from one's hands off the cards.


Rewards:
Participated in a Miniature Exchange. Destroyed a Zombie!
User avatar
Channeler
Kurgan

Witch Lord
Witch Lord
 
Posts: 7105
Images: 85
Joined: February 23rd, 2019, 7:08 pm
Location: https://discord.gg/2R9pEP4cty
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon
Usergroups:
Scribes Group MemberAdventurers' Guild Group MemberChampion Group Member

Re: North American Card Sizes for Sleeves

Postby Jalapenotrellis » June 11th, 2019, 10:41 pm

Ah...I guess I just have finger oil since the games I lead lack food. :) Sometimes they are hard to pick up off the table though.
Jalapenotrellis

Necromancer
Necromancer
 
Posts: 330
Joined: July 22nd, 2018, 2:50 am
Location: Austin,TX
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon
Usergroups:
Champion Group Member

Re: North American Card Sizes for Sleeves

Postby mitchiemasha » June 12th, 2019, 7:54 am

Another card deck isn't that expensive. Personally I prefer them warn than new. I find sleeving a waste of plastic. They're not super rare cards from a crazy expensive collectors set. It's like those people that use to put plastic on their sofa in the 80's to keep it nice. Why buy a nice sofa in the first place, you want to experience the card in your hand, it's texture, otherwise we might as well have plastic cards.


Rewards:
Destroyed a Zombie! Encountered a menacing Chaos Warlock!
Prince
mitchiemasha

Halberdier
Halberdier
 
Posts: 1474
Joined: August 14th, 2014, 2:05 am
Forum Language: British English
Hero:
Evil Sorcerer: Morcar
Usergroups:
Champion Group Member

Re: North American Card Sizes for Sleeves

Postby Kurgan » June 13th, 2019, 11:06 pm

I wonder about putting a plastic coating (like professional playing card decks) on your cards... that might serve both purposes.


Rewards:
Participated in a Miniature Exchange. Destroyed a Zombie!
User avatar
Channeler
Kurgan

Witch Lord
Witch Lord
 
Posts: 7105
Images: 85
Joined: February 23rd, 2019, 7:08 pm
Location: https://discord.gg/2R9pEP4cty
Forum Language: English (United States)
Hero:
Evil Sorcerer: Zargon
Usergroups:
Scribes Group MemberAdventurers' Guild Group MemberChampion Group Member

Re: North American Card Sizes for Sleeves

Postby lestodante » June 14th, 2019, 9:35 pm

Playing with nephews I really need to use sleeves if I want to protect my cards... and italian cards are very expensive, not cheaper like the english version.


Rewards:
Wizard of Zargon Group Member Participated in four (4) Miniature Exchanges. Participated in four (4) Miniature Exchanges. Participated in a Miniature Exchange. Wrote an article for the Blog. Encountered a menacing Chaos Warlock!
User avatar
lestodante

Yeti
Yeti
 
Posts: 2837
Images: 5
Joined: January 7th, 2017, 9:40 am
Location: Italy
Forum Language: English (United States)
Hero:
Evil Sorcerer: Morcar
Usergroups:
Wizards of Zargon Group MemberScribes Group MemberChampion Group Member

Re: North American Card Sizes for Sleeves

Postby Anderas » June 15th, 2019, 3:37 am

Best about sleeves is you can put a normal playcard inside, and then your self printed card to the front... feels like a card, but is easily selfmade

the original eu card size is 53.7 mm x 80mm


Rewards:
Hosted a Play-by-Post game. Played a turn in a Play-by-Post game. Created a Hot Topic. Participated in four (4) Miniature Exchanges. Participated in three (3) Miniature Exchanges. Zealot Miniatures: Twisting Catacombs Kickstarter Backer Destroyed a Zombie! Encountered a menacing Chaos Warlock!
User avatar
Anderas
NOT Andreas!

Polar Warbear
Polar Warbear
 
Posts: 3397
Images: 73
Joined: September 20th, 2014, 7:02 am
Forum Language: British English
Hero:
Evil Sorcerer: Morcar
Usergroups:
Wizards of Zargon Group Member Adventurers' Guild Group Member Artists Group Member
Champion Group Member

Next

Return to Game Systems

Who is online

Users browsing this forum: No registered users and 0 guests

cron